PAR Weathercoat is 100% Acrylic Exterior Wall Emulsion with 6 years protection warranty. Excellent fungal and algae resistance, 100% acrylic exterior paint that outlast ordinary emulsion. New, unpainted surfaces Allow surfaces to cure and dry out at least 28 days. Large cracks must be repaired with cement: sand mix and rendered smooth. Make good all minor defects with appropriate exterior grade fillers. Remove all loosely adhering residues by thorough brushing.

Luxurious Sheen Interior Wall Emulsion Bright, smooth, luxurious silk finish, high grade interior emulsion New, unpainted surfaces Allow surfaces to cure and dry out at least 28 days. Large cracks must be repaired with cement: sand mix and rendered smooth. Make good all minor defects with appropriate fillers. Remove all loosely adhering residues by thorough brushing. Repainting Check for powders or chalk. These surface contaminants must be completely removed by washing with warm water and detergent solutions.

Rich Matt interior Wall Emulsion Brilliant and rich matt finish, soft touch, high-grade interior emulsion. New, unpainted surfaces Allow surfaces to cure and dry out at least 28 days. Large cracks must be repaired with cement: sand mix and rendered smooth. Make good all minor defects with appropriate fillers. Remove all loosely adhering residues by thorough brushing. Repainting Check for powders or chalk. These surface contaminants must be completely removed by washing with warm water and detergent solutions.

Brilliant Gloss Enamel for Wood & Metal Ultra high gloss finish solvent based paint. Metal Using mineral turpentine, remove all grease, wax and surface contaminants. Lightly abrade surfaces and dust off. Previously painted surfaces must be thoroughly rubbed down using a suitable abrasive paper. Remove all grease, wax and surface contaminants by solvent wiping with mineral turpentine. Wood Surfaces must be clean, dry and free from all defective or poorly adhering materials.

PAR Timbercote: Exterior Timber Finish Decorative wood stain on exterior and interior timber surfaces which preserves the natural beauty of wood grain. Properly prepared new Wood Surfaces must be clean, dry and free from all defective or poorly adhering materials. Repainting - Wood Previously painted surfaces should be thoroughly rubbed down using appropriate abrasive paper and dust off. Patch all holes and crevices with appropriate wood fillers.