SIKA'S PROVEN PROTECTIVE COATING SYSTEMS CONTROL COSTLY CORROSION PROBLEMS  

SikaTop Seal 107 is a cement based 2-component polymer modified water-proof slurry coating. It is applied to concrete and mortar to prevent water infiltration. SikaTop Seal 107 has been approved by the British Board of Agreement, Certificate No. 87/1938. SikaTop Seal 107 is suitable for: Interior and exterior waterproofing and damp-proofing concrete, mortar renderings, brickwork and blockwork. Protection of concrete structures against the effects of carbon dioxide, de-icing salts and freeze-thaw.

Permanently elastic 1-component joint sealing compound on polyurethane base. Universal joint sealing compound for building construction. 1-component, ready for use Good adhesion to many substrates Good weathering and aging properties Good workability, easy to use Can be overpainted

Snowcem is a white or pigmented cement based paint/coating which, when applied correctly, sets to a rock hard finish. Snowcem is durable and reduces the risk of rain and damp penetration. Being cement based, Snowcem is very economical compared to other types of paint.

Rugasol-G is an economical surface preparation to concrete that shall be overlaid or abutted with a plaster, epoxy screed or another layer of concrete. After concrete has cured, its surface is washed off and the aggregates in the concrete or mortar will be exposed. This eliminates the need for sand blasting or scabbling. It is also used to achieve a decorative exposed aggregate finish.

Sikadur 42 is a solvent-free, 3-component pourable grout based on a combination of epoxy resins and specially graded aggregates. After mixing, it forms a flowable mortar, suitable for grouting and filling. As self-levelling mortar on: -  Concrete and stone -  Mortar and plasterwork -  Steel, aluminium and iron -  Asbestos cement and wood -  Polyester, epoxy, etc Rigid connections: -  Connecting irons -  Iron ties -  Mounting supports -  Tie rods Grouting of guide rails, rail posts Grouting of: -  Support plates -  Machine foundations -  Bridge supports -  Driving track overhead crossings -  Sleeper-less rail fixations -  Crane rails Filing and backfilling of cavities.

Sika Grout 215 is a pumpable, non-shrink self-levelling, premixed cementitious grout with extended working time to suit local ambient temperature. Sika Grout 215 is suitable for repairs to concrete structures and the following grouting works with clearance of 5 mm or more: Machine foundations Columns in precast construction Concrete anchors Bridge bearings Cavities Gaps Recesses Rail beds Honeycombs (pre-packed grouting)

Sika MonoTop-R40 is a one component, thixotropic, polymer modified, silicafume which is based on cementitious repair mortar, exhibits high bond strength, greatly reduced water and carbon dioxide permeability and improved resistance to oils and chemicals. Fast repairs to horizontal or mortar surfaces above and below ground level. Filling/Repair mortar for voids, honeycomb areas, etc. Repair of spalled concrete caused by reinforcement corrosion. Repairs with improved resistance to oils, sewage, chemicals, etc.